request-tracker4 4.2.12-5 / usr / sbin / rt-serializer-4

#!/usr/bin/perl
# BEGIN BPS TAGGED BLOCK {{{
#
# COPYRIGHT:
#
# This software is Copyright (c) 1996-2015 Best Practical Solutions, LLC
#                                          <sales@bestpractical.com>
#
# (Except where explicitly superseded by other copyright notices)
#
#
# LICENSE:
#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
# from www.gnu.org.
#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 or visit their web page on the internet at
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
#
#
# CONTRIBUTION SUBMISSION POLICY:
#
# (The following paragraph is not intended to limit the rights granted
# to you to modify and distribute this software under the terms of
# the GNU General Public License and is only of importance to you if
# you choose to contribute your changes and enhancements to the
# community by submitting them to Best Practical Solutions, LLC.)
#
# By intentionally submitting any modifications, corrections or
# derivatives to this work, or any other work intended for use with
# Request Tracker, to Best Practical Solutions, LLC, you confirm that
# you are the copyright holder for those contributions and you grant
# Best Practical Solutions,  LLC a nonexclusive, worldwide, irrevocable,
# royalty-free, perpetual, license to use, copy, create derivative
# works based on those contributions, and sublicense and distribute
# those contributions and any derivatives thereof.
#
# END BPS TAGGED BLOCK }}}
use strict;
use warnings;

# fix lib paths, some may be relative
BEGIN {
    require File::Spec;
    my @libs = ("/usr/share/request-tracker4/lib", "/usr/local/share/request-tracker4/lib");
    my $bin_path;

    for my $lib (@libs) {
        unless ( File::Spec->file_name_is_absolute($lib) ) {
            unless ($bin_path) {
                if ( File::Spec->file_name_is_absolute(__FILE__) ) {
                    $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
                }
                else {
                    require FindBin;
                    no warnings "once";
                    $bin_path = $FindBin::Bin;
                }
            }
            $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
        }
        unshift @INC, $lib;
    }

}

use RT;
RT::LoadConfig();
RT::Init();

@RT::Record::ISA = qw( DBIx::SearchBuilder::Record RT::Base );

use RT::Migrate;
use RT::Migrate::Serializer::File;
use Getopt::Long;
use Pod::Usage qw//;
use Time::HiRes qw//;

my %OPT;
GetOptions(
    \%OPT,
    "help|?",
    "verbose|v!",
    "quiet|q!",

    "directory|d=s",
    "force|f!",
    "size|s=i",

    "users!",
    "groups!",
    "deleted!",

    "scrips!",
    "tickets!",
    "acls!",

    "clone",
    "incremental",

    "gc=i",
    "page=i",
) or Pod::Usage::pod2usage();

Pod::Usage::pod2usage(-verbose => 1) if $OPT{help};

my %args;
$args{Directory}   = $OPT{directory};
$args{Force}       = $OPT{force};
$args{MaxFileSize} = $OPT{size} if $OPT{size};

$args{AllUsers}      = $OPT{users}    if defined $OPT{users};
$args{AllGroups}     = $OPT{groups}   if defined $OPT{groups};
$args{FollowDeleted} = $OPT{deleted}  if defined $OPT{deleted};

$args{FollowScrips}  = $OPT{scrips}   if defined $OPT{scrips};
$args{FollowTickets} = $OPT{tickets}  if defined $OPT{tickets};
$args{FollowACL}     = $OPT{acls}     if defined $OPT{acls};

$args{Clone}         = $OPT{clone}       if $OPT{clone};
$args{Incremental}   = $OPT{incremental} if $OPT{incremental};

$args{GC}   = defined $OPT{gc}   ? $OPT{gc}   : 5000;
$args{Page} = defined $OPT{page} ? $OPT{page} : 100;

if (($OPT{clone} or $OPT{incremental})
        and grep { /^(users|groups|deleted|scrips|tickets|acls)$/ } keys %OPT) {
    die "You cannot specify object types when cloning.\n\nPlease see $0 --help.\n";
}

my $walker;

my $gnuplot = `which gnuplot`;
my $msg = "";
if (-t STDOUT and not $OPT{verbose} and not $OPT{quiet}) {
    $args{Progress} = RT::Migrate::progress(
        top    => \&gnuplot,
        bottom => sub { print "\n$msg"; $msg = ""; },
        counts => sub { $walker->ObjectCount },
        max    => { estimate() },
    );
    $args{MessageHandler} = sub {
        print "\r", " "x60, "\r", $_[-1]; $msg = $_[-1];
    };
    $args{Verbose}  = 0;
}
$args{Verbose} = 0 if $OPT{quiet};


$walker = RT::Migrate::Serializer::File->new( %args );

my $log = RT::Migrate::setup_logging( $walker->{Directory} => 'serializer.log' );
print "Logging warnings and errors to $log\n" if $log;

print "Beginning database serialization...";
my %counts = $walker->Export;

my @files = $walker->Files;
print "Wrote @{[scalar @files]} files:\n";
print "    $_\n" for @files;
print "\n";

print "Total object counts:\n";
for (sort {$counts{$b} <=> $counts{$a}} keys %counts) {
    printf "%8d %s\n", $counts{$_}, $_;
}

if ($log and -s $log) {
    print STDERR "\n! Some warnings or errors occurred during serialization."
                ."\n! Please see $log for details.\n\n";
} else {
    unlink $log;
}

sub estimate {
    $| = 1;
    my %e;

    # Expected types we'll serialize
    my @types = map {"RT::$_"} qw/
        Queue Ticket Transaction Attachment Link
        User  Group  GroupMember Attribute
        CustomField CustomFieldValue
        ObjectCustomField ObjectCustomFieldValue
                                 /;

    for my $class (@types) {
        print "Estimating $class count...";
        my $collection = $class . "s";
        if ($collection->require) {
            my $objs = $collection->new( RT->SystemUser );
            $objs->FindAllRows;
            $objs->UnLimit;
            $objs->{allow_deleted_search} = 1 if $class eq "RT::Ticket";
            $e{$class} = $objs->DBIx::SearchBuilder::Count;
        }
        print "\r", " "x60, "\r";
    }

    return %e;
}


sub gnuplot {
    my ($elapsed, $rows, $cols) = @_;
    my $length = $walker->StackSize;
    my $file = $walker->Directory . "/progress.plot";
    open(my $dat, ">>", $file);
    printf $dat "%10.3f\t%8d\n", $elapsed, $length;
    close $dat;

    if ($rows <= 24 or not $gnuplot) {
        print "\n\n";
    } elsif ($elapsed) {
        my $gnuplot = qx|
            gnuplot -e '
                set term dumb $cols @{[$rows - 12]};
                set xlabel "Seconds";
                unset key;
                set xrange [0:*];
                set yrange [0:*];
                set title "Queue length";
                plot "$file" using 1:2 with lines
            '
        |;
        if ($? == 0 and $gnuplot) {
            $gnuplot =~ s/^(\s*\n)//;
            print $gnuplot;
            unlink $file;
        } else {
            warn "Couldn't run gnuplot (\$? == $?): $!\n";
        }
    } else {
        print "\n" for 1..($rows - 13);
    }
}

=head1 NAME

rt-serializer - Serialize an RT database to disk

=head1 SYNOPSIS

    rt-validator --check && rt-serializer

This script is used to write out the entire RT database to disk, for
later import into a different RT instance.  It requires that the data in
the database be self-consistent, in order to do so; please make sure
that the database being exported passes validation by L<rt-validator>
before attempting to use C<rt-serializer>.

While running, it will attempt to estimate the number of remaining
objects to be serialized; these estimates are pessimistic, and will be
incorrect if C<--no-users>, C<--no-groups>, or C<--no-tickets> are used.

If the controlling terminal is large enough (more than 25 columns high)
and the C<gnuplot> program is installed, it will also show a textual
graph of the queue size over time.

=head2 OPTIONS

=over

=item B<--directory> I<name>

The name of the output directory to write data files to, which should
not exist yet; it is a fatal error if it does.  Defaults to
C<< ./I<$Organization>:I<Date>/ >>, where I<$Organization> is as set in
F<RT_SiteConfig.pm>, and I<Date> is today's date.

=item B<--force>

Remove the output directory before starting.

=item B<--size> I<megabytes>

By default, C<rt-serializer> chunks its output into data files which are
around 32Mb in size; this option is used to set a different threshold
size, in megabytes.  Note that this is the threshold after which it
rotates to writing a new file, and is as such the I<lower bound> on the
size of each output file.

=item B<--no-users>

By default, all privileged users are serialized; passing C<--no-users>
limits it to only those users which are referenced by serialized tickets
and history, and are thus necessary for internal consistency.

=item B<--no-groups>

By default, all groups are serialized; passing C<--no-groups> limits it
to only system-internal groups, which are needed for internal
consistency.

=item B<--no-deleted>

By default, all tickets, including deleted tickets, are serialized;
passing C<--no-deleted> skips deleted tickets during serialization.

=item B<--scrips>

No scrips or templates are serialized by default; this option forces all
scrips and templates to be serialized.

=item B<--acls>

No ACLs are serialized by default; this option forces all ACLs to be
serialized.

=item B<--no-tickets>

Skip serialization of all ticket data.

=item B<--clone>

Serializes your entire database, creating a clone.  This option should
be used if you want to migrate your RT database from one database type
to another (e.g.  MySQL to Postgres).  It is an error to combine
C<--clone> with any option that limits object types serialized.  No
dependency walking is performed when cloning. C<rt-importer> will detect
that your serialized data set was generated by a clone.

=item B<--incremental>

Will generate an incremenal serialized dataset using the data stored in
your IncrementalRecords database table.  This assumes that you have created
that table and run RT using the Record_Local.pm shim as documented in
C<docs/incremental-export/>.

=item B<--gc> I<n>

Adjust how often the garbage collection sweep is done; lower numbers are
more frequent.  See L</GARBAGE COLLECTION>.

=item B<--page> I<n>

Adjust how many rows are pulled from the database in a single query.  Disable
paging by setting this to 0.  Defaults to 100.

Keep in mind that rows from RT's Attachments table are the limiting factor when
determining page size.  You should likely be aiming for 60-75% of your total
memory on an otherwise unloaded box.

=item B<--quiet>

Do not show graphical progress UI.

=item B<--verbose>

Do not show graphical progress UI, but rather log was each row is
written out.

=back

=head1 GARBAGE COLLECTION

C<rt-serializer> maintains a priority queue of objects to serialize, or
searches which may result in objects to serialize.  When inserting into
this queue, it does no checking if the object in question is already in
the queue, or if the search will contain any results.  These checks are
done when the object reaches the front of the queue, or during periodic
garbage collection.

During periodic garbage collection, the entire queue is swept for
objects which have already been serialized, occur more than once in the
queue, and searches which contain no results in the database.  This is
done to reduce the memory footprint of the serialization process, and is
triggered when enough new objects have been placed in the queue.  This
parameter is tunable via the C<--gc> parameter, which defaults to
running garbage collection every 5,000 objects inserted into the queue;
smaller numbers will result in more frequent garbage collection.

The default of 5,000 is roughly tuned based on a database with several
thousand tickets, but optimal values will vary wildly depending on
database configuration and size.  Values as low as 25 have provided
speedups with smaller databases; if speed is a factor, experimenting
with different C<--gc> values may be helpful.  Note that there are
significant boundary condition changes in serialization rate, as the
queue empties and fills, causing the time estimates to be rather
imprecise near the start and end of the process.

Setting C<--gc> to 0 turns off all garbage collection.  Be aware that
this will bloat the memory usage of the serializer.  Any negative value
for C<--gc> turns off periodic garbage collection and instead objects
already serialized or in the queue are checked for at the time they
would be inserted.

=cut