libinsighttoolkit4-dev 4.9.0-4ubuntu1 / usr / include / ITK-4.9 / openjpeg.h

 /*
 * Copyright (c) 2002-2007, Communications and Remote Sensing Laboratory, Universite catholique de Louvain (UCL), Belgium
 * Copyright (c) 2002-2007, Professor Benoit Macq
 * Copyright (c) 2001-2003, David Janssens
 * Copyright (c) 2002-2003, Yannick Verschueren
 * Copyright (c) 2003-2007, Francois-Olivier Devaux and Antonin Descampe
 * Copyright (c) 2005, Herve Drolon, FreeImage Team
 * Copyright (c) 2006-2007, Parvatha Elangovan
 * Copyright (c) 2008, Jerome Fimes, Communications & Systemes <jerome.fimes@c-s.fr>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS'
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
#ifndef OPENJPEG_H
#define OPENJPEG_H

#include "openjpeg_mangle.h"

#include "openjpegDllConfig.h"

#if defined(OPJ_STATIC) || (!defined(WIN32) && !defined(__MINGW32__)) || defined(__WIN32__)
  #define OPJ_API
  #define OPJ_CALLCONV
#else
  #define OPJ_CALLCONV __stdcall
  #ifdef OPJ_EXPORTS
    #define OPJ_API __declspec(dllexport)
  #else
    #define OPJ_API __declspec(dllimport)
  #endif /* OPJ_EXPORTS */
#endif /* !OPJ_STATIC || !WIN32 */

#ifndef __cplusplus
  #if defined(HAVE_STDBOOL_H)
    #include <stdbool.h>
  #else
    #if !defined(bool)
      // Note: this is a hack, and incorrect matching of types may
      // cause undefined behavior.
      #if defined(__APPLE__) && defined( __ppc__ )
        // Mac_OS_X_ABI_Function_Calls.pdf
        // only ppc sizeof(bool) is 4 bytes
        #define bool  unsigned int
      #else
         #define bool  unsigned char
      #endif
    #endif
    #if !defined(true)
      #define true  1
    #endif
    #if !defined(false)
      #define  false  0
    #endif
  #endif
#endif /* __cplusplus */
typedef unsigned int  OPJ_UINT32;
typedef int    OPJ_INT32;
typedef unsigned short  OPJ_UINT16;
typedef short    OPJ_INT16;
typedef char    OPJ_CHAR;
typedef unsigned char  OPJ_BYTE;
typedef unsigned int  OPJ_SIZE_T;
typedef double    OPJ_FLOAT64;
typedef float    OPJ_FLOAT32;
#if defined(_MSC_VER) || defined(__BORLANDC__)
  typedef __int64    OPJ_INT64;
#else
  typedef long long  OPJ_INT64;
#endif

#define OPENJPEG_VERSION "1.2.0"
/*
==========================================================
   Compiler directives
==========================================================
*/
#include <stdio.h>





/*
==========================================================
   Useful constant definitions
==========================================================
*/

#define OPJ_PATH_LEN          4096 /**< Maximum allowed size for filenames */
#define J2K_MAXRLVLS          33          /**< Number of maximum resolution level authorized */
#define J2K_MAXBANDS          (3*J2K_MAXRLVLS-2)  /**< Number of maximum sub-band linked to number of resolution level */
#define J2K_DEFAULT_NB_SEGS        10
#define J2K_STREAM_CHUNK_SIZE      0x100000 /** 1 mega by default */
#define J2K_DEFAULT_HEADER_SIZE      1000
#define J2K_MCC_DEFAULT_NB_RECORDS    10
#define J2K_MCT_DEFAULT_NB_RECORDS    10

/* UniPG>> */
#define JPWL_MAX_NO_TILESPECS  16 /**< Maximum number of tile parts expected by JPWL: increase at your will */
#define JPWL_MAX_NO_PACKSPECS  16 /**< Maximum number of packet parts expected by JPWL: increase at your will */
#define JPWL_MAX_NO_MARKERS  512 /**< Maximum number of JPWL markers: increase at your will */
#define JPWL_PRIVATEINDEX_NAME "jpwl_index_privatefilename" /**< index file name used when JPWL is on */
#define JPWL_EXPECTED_COMPONENTS 3 /**< Expect this number of components, so you'll find better the first EPB */
#define JPWL_MAXIMUM_TILES 8192 /**< Expect this maximum number of tiles, to avoid some crashes */
#define JPWL_MAXIMUM_HAMMING 2 /**< Expect this maximum number of bit errors in marker id's */
#define JPWL_MAXIMUM_EPB_ROOM 65450 /**< Expect this maximum number of bytes for composition of EPBs */
/* <<UniPG */

/*
==========================================================
   enum definitions
==========================================================
*/
/**
Rsiz Capabilities
*/
typedef enum RSIZ_CAPABILITIES {
  STD_RSIZ = 0,    /** Standard JPEG2000 profile*/
  CINEMA2K = 3,    /** Profile name for a 2K image*/
  CINEMA4K = 4,    /** Profile name for a 4K image*/
  MCT = 0x8100
} OPJ_RSIZ_CAPABILITIES;

/**
Digital cinema operation mode
*/
typedef enum CINEMA_MODE {
  OFF = 0,          /** Not Digital Cinema*/
  CINEMA2K_24 = 1,  /** 2K Digital Cinema at 24 fps*/
  CINEMA2K_48 = 2,  /** 2K Digital Cinema at 48 fps*/
  CINEMA4K_24 = 3    /** 4K Digital Cinema at 24 fps*/
}OPJ_CINEMA_MODE;

/**
Progression order
*/
typedef enum PROG_ORDER {
  PROG_UNKNOWN = -1,  /**< place-holder */
  LRCP = 0,    /**< layer-resolution-component-precinct order */
  RLCP = 1,    /**< resolution-layer-component-precinct order */
  RPCL = 2,    /**< resolution-precinct-component-layer order */
  PCRL = 3,    /**< precinct-component-resolution-layer order */
  CPRL = 4    /**< component-precinct-resolution-layer order */
} OPJ_PROG_ORDER;

/**
Supported image color spaces
*/
typedef enum COLOR_SPACE {
  CLRSPC_UNKNOWN = -1,  /**< not supported by the library */
  CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */
  CLRSPC_SRGB = 1,    /**< sRGB */
  CLRSPC_GRAY = 2,    /**< grayscale */
  CLRSPC_SYCC = 3      /**< YUV */
} OPJ_COLOR_SPACE;

/**
Supported codec
*/
typedef enum CODEC_FORMAT {
  CODEC_UNKNOWN = -1,  /**< place-holder */
  CODEC_J2K = 0,    /**< JPEG-2000 codestream : read/write */
  CODEC_JPT = 1,    /**< JPT-stream (JPEG 2000, JPIP) : read only */
  CODEC_JP2 = 2    /**< JPEG-2000 file format : read/write */
} OPJ_CODEC_FORMAT;




/*
==========================================================
   event manager typedef definitions
==========================================================
*/

/**
Callback function prototype for events
@param msg Event message
@param client_data
*/
typedef void (*opj_msg_callback) (const OPJ_CHAR *msg, void *client_data);




/*
==========================================================
   codec typedef definitions
==========================================================
*/

/**
Progression order changes
*/
typedef struct opj_poc
{
  /** Resolution num start, Component num start, given by POC */
  OPJ_UINT32 resno0, compno0;
  /** Layer num end,Resolution num end, Component num end, given by POC */
  OPJ_UINT32 layno1, resno1, compno1;
  /** Layer num start,Precinct num start, Precinct num end */
  OPJ_UINT32 layno0, precno0, precno1;
  /** Progression order enum*/
  OPJ_PROG_ORDER prg1,prg;
  /** Progression order string*/
  OPJ_CHAR progorder[5];
  /** Tile number. It is signed because j2k.c use -1 as possible error code. */
  OPJ_INT32 tile;
  /** Start and end values for Tile width and height*/
  OPJ_INT32 tx0,tx1,ty0,ty1;
  /** Start value, initialised in pi_initialise_encode*/
  OPJ_UINT32 layS, resS, compS, prcS;
  /** End value, initialised in pi_initialise_encode */
  OPJ_UINT32 layE, resE, compE, prcE;
  /** Start and end values of Tile width and height, initialised in pi_initialise_encode*/
  OPJ_UINT32 txS,txE,tyS,tyE,dx,dy;
  /** Temporary values for Tile parts, initialised in pi_create_encode */
  OPJ_UINT32 lay_t, res_t, comp_t, prc_t,tx0_t,ty0_t;
} opj_poc_t;

/**
Compression parameters
*/
typedef struct opj_cparameters {
  /** size of tile: tile_size_on = false (not in argument) or = true (in argument) */
  bool tile_size_on;
  /** XTOsiz */
  int cp_tx0;
  /** YTOsiz */
  int cp_ty0;
  /** XTsiz */
  int cp_tdx;
  /** YTsiz */
  int cp_tdy;
  /** allocation by rate/distortion */
  int cp_disto_alloc;
  /** allocation by fixed layer */
  int cp_fixed_alloc;
  /** add fixed_quality */
  int cp_fixed_quality;
  /** fixed layer */
  int *cp_matrice;
  /** comment for coding */
  char *cp_comment;
  /** csty : coding style */
  int csty;
  /** progression order (default LRCP) */
  OPJ_PROG_ORDER prog_order;
  /** progression order changes */
  opj_poc_t POC[32];
  /** number of progression order changes (POC), default to 0 */
  int numpocs;
  /** number of layers */
  int tcp_numlayers;
  /** rates of layers */
  float tcp_rates[100];
  /** different psnr for successive layers */
  float tcp_distoratio[100];
  /** number of resolutions */
  int numresolution;
  /** initial code block width, default to 64 */
   int cblockw_init;
  /** initial code block height, default to 64 */
  int cblockh_init;
  /** mode switch (cblk_style) */
  int mode;
  /** 1 : use the irreversible DWT 9-7, 0 : use lossless compression (default) */
  int irreversible;
  /** region of interest: affected component in [0..3], -1 means no ROI */
  int roi_compno;
  /** region of interest: upshift value */
  int roi_shift;
  /* number of precinct size specifications */
  int res_spec;
  /** initial precinct width */
  int prcw_init[J2K_MAXRLVLS];
  /** initial precinct height */
  int prch_init[J2K_MAXRLVLS];

  /**@name command line encoder parameters (not used inside the library) */
  /*@{*/
  /** input file name */
  char infile[OPJ_PATH_LEN];
  /** output file name */
  char outfile[OPJ_PATH_LEN];
  /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */
  int index_on;
  /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */
  char index[OPJ_PATH_LEN];
  /** subimage encoding: origin image offset in x direction */
  int image_offset_x0;
  /** subimage encoding: origin image offset in y direction */
  int image_offset_y0;
  /** subsampling value for dx */
  int subsampling_dx;
  /** subsampling value for dy */
  int subsampling_dy;
  /** input file format 0: PGX, 1: PxM, 2: BMP 3:TIF*/
  int decod_format;
  /** output file format 0: J2K, 1: JP2, 2: JPT */
  int cod_format;
  /*@}*/

/* UniPG>> */
  /**@name JPWL encoding parameters */
  /*@{*/
  /** enables writing of EPC in MH, thus activating JPWL */
  bool jpwl_epc_on;
  /** error protection method for MH (0,1,16,32,37-128) */
  int jpwl_hprot_MH;
  /** tile number of header protection specification (>=0) */
  int jpwl_hprot_TPH_tileno[JPWL_MAX_NO_TILESPECS];
  /** error protection methods for TPHs (0,1,16,32,37-128) */
  int jpwl_hprot_TPH[JPWL_MAX_NO_TILESPECS];
  /** tile number of packet protection specification (>=0) */
  int jpwl_pprot_tileno[JPWL_MAX_NO_PACKSPECS];
  /** packet number of packet protection specification (>=0) */
  int jpwl_pprot_packno[JPWL_MAX_NO_PACKSPECS];
  /** error protection methods for packets (0,1,16,32,37-128) */
  int jpwl_pprot[JPWL_MAX_NO_PACKSPECS];
  /** enables writing of ESD, (0=no/1/2 bytes) */
  int jpwl_sens_size;
  /** sensitivity addressing size (0=auto/2/4 bytes) */
  int jpwl_sens_addr;
  /** sensitivity range (0-3) */
  int jpwl_sens_range;
  /** sensitivity method for MH (-1=no,0-7) */
  int jpwl_sens_MH;
  /** tile number of sensitivity specification (>=0) */
  int jpwl_sens_TPH_tileno[JPWL_MAX_NO_TILESPECS];
  /** sensitivity methods for TPHs (-1=no,0-7) */
  int jpwl_sens_TPH[JPWL_MAX_NO_TILESPECS];
  /*@}*/
/* <<UniPG */

  /** Digital Cinema compliance 0-not compliant, 1-compliant*/
  OPJ_CINEMA_MODE cp_cinema;
  /** Maximum rate for each component. If == 0, component size limitation is not considered */
  int max_comp_size;
  /** Profile name*/
  OPJ_RSIZ_CAPABILITIES cp_rsiz;
  /** Tile part generation*/
  char tp_on;
  /** Flag for Tile part generation*/
  char tp_flag;
  /** MCT (multiple component transform) */
  char tcp_mct;
  /** Naive implementation of MCT restricted to a single reversible array based encoding without offset concerning all the components. */
  void * mct_data;

} opj_cparameters_t;

/**
Decompression parameters
*/
typedef struct opj_dparameters {
  /**
  Set the number of highest resolution levels to be discarded.
  The image resolution is effectively divided by 2 to the power of the number of discarded levels.
  The reduce factor is limited by the smallest total number of decomposition levels among tiles.
  if != 0, then original dimension divided by 2^(reduce);
  if == 0 or not used, image is decoded to the full resolution
  */
  int cp_reduce;
  /**
  Set the maximum number of quality layers to decode.
  If there are less quality layers than the specified number, all the quality layers are decoded.
  if != 0, then only the first "layer" layers are decoded;
  if == 0 or not used, all the quality layers are decoded
  */
  int cp_layer;

  /**
   * Restrictive decoding parameters.
   */
  OPJ_INT32 m_decode_start_x;
  OPJ_INT32 m_decode_start_y ;
  OPJ_INT32 m_decode_end_x ;
  OPJ_INT32 m_decode_end_y ;

  /**@name command line encoder parameters (not used inside the library) */
  /*@{*/
  /** input file name */
  char infile[OPJ_PATH_LEN];
  /** output file name */
  char outfile[OPJ_PATH_LEN];
  /** input file format 0: J2K, 1: JP2, 2: JPT */
  int decod_format;
  /** output file format 0: PGX, 1: PxM, 2: BMP */
  int cod_format;
  /*@}*/

/* UniPG>> */
  /**@name JPWL decoding parameters */
  /*@{*/
  /** activates the JPWL correction capabilities */
  bool jpwl_correct;
  /** expected number of components */
  int jpwl_exp_comps;
  /** maximum number of tiles */
  int jpwl_max_tiles;

  /** use restrictive decoding ? */
  OPJ_UINT32 m_use_restrict_decode : 1;
  /*@}*/
/* <<UniPG */

} opj_dparameters_t;

/**
 * J2k codec.
 */
typedef void * opj_codec_t;


/*
==========================================================
   I/O stream typedef definitions
==========================================================
*/

/*
 * Stream open flags.
 */
/** The stream was opened for reading. */
#define OPJ_STREAM_READ  0x0001
/** The stream was opened for writing. */
#define OPJ_STREAM_WRITE 0x0002


typedef OPJ_UINT32 (* opj_stream_read_fn) (void * p_buffer, OPJ_UINT32 p_nb_bytes, void * p_user_data) ;
typedef OPJ_UINT32 (* opj_stream_write_fn) (void * p_buffer, OPJ_UINT32 p_nb_bytes, void * p_user_data) ;
typedef OPJ_SIZE_T (* opj_stream_skip_fn) (OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;
typedef bool (* opj_stream_seek_fn) (OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;


typedef void * opj_stream_t;

/*
==========================================================
   image typedef definitions
==========================================================
*/

/**
Defines a single image component
*/
typedef struct opj_image_comp {
  /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */
  OPJ_UINT32 dx;
  /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */
  OPJ_UINT32 dy;
  /** data width */
  OPJ_UINT32 w;
  /** data height */
  OPJ_UINT32 h;
  /** x component offset compared to the whole image */
  OPJ_INT32 x0;
  /** y component offset compared to the whole image */
  OPJ_INT32 y0;
  /** precision */
  OPJ_UINT32 prec;
  /** number of decoded resolution */
  OPJ_UINT32 resno_decoded;
  /** number of division by 2 of the out image compared to the original size of image */
  OPJ_UINT32 factor;
  /** image component data */
  int *data;
  /** signed (1) / unsigned (0) */
  OPJ_UINT32 sgnd : 1;

} opj_image_comp_t;

/**
Defines image data and characteristics
*/
typedef struct opj_image
{
  /** XOsiz: horizontal offset from the origin of the reference grid to the left side of the image area */
  OPJ_INT32 x0;
  /** YOsiz: vertical offset from the origin of the reference grid to the top side of the image area */
  OPJ_INT32 y0;
  /** Xsiz: width of the reference grid */
  OPJ_INT32 x1;
  /** Ysiz: height of the reference grid */
  OPJ_INT32 y1;
  /** number of components in the image */
  OPJ_UINT32 numcomps;
  /** color space: sRGB, Greyscale or YUV */
  OPJ_COLOR_SPACE color_space;
  /** image components */
  opj_image_comp_t *comps;
} opj_image_t;

/**
Component parameters structure used by the opj_image_create function
*/
typedef struct opj_image_comptparm {
  /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */
  unsigned int dx;
  /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */
  unsigned int dy;
  /** data width */
  unsigned int w;
  /** data height */
  unsigned int h;
  /** x component offset compared to the whole image */
  int x0;
  /** y component offset compared to the whole image */
  int y0;
  /** precision */
  int prec;
  /** image depth in bits */
  int bpp;
  /** signed (1) / unsigned (0) */
  int sgnd;
} opj_image_cmptparm_t;

/*
==========================================================
   Information on the JPEG 2000 codestream
==========================================================
*/

/**
Index structure : Information concerning a packet inside tile
*/
typedef struct opj_packet_info {
  /** packet start position (including SOP marker if it exists) */
  int start_pos;
  /** end of packet header position (including EPH marker if it exists)*/
  int end_ph_pos;
  /** packet end position */
  int end_pos;
  /** packet distorsion */
  double disto;
} opj_packet_info_t;

/**
Index structure : Information concerning tile-parts
*/
typedef struct opj_tp_info {
  /** start position of tile part */
  int tp_start_pos;
  /** end position of tile part header */
  int tp_end_header;
  /** end position of tile part */
  int tp_end_pos;
  /** start packet of tile part */
  int tp_start_pack;
  /** number of packets of tile part */
  int tp_numpacks;
} opj_tp_info_t;

/**
Index structure : information regarding tiles
*/
typedef struct opj_tile_info {
  /** value of thresh for each layer by tile cfr. Marcela   */
  double *thresh;
  /** number of tile */
  int tileno;
  /** start position */
  int start_pos;
  /** end position of the header */
  int end_header;
  /** end position */
  int end_pos;
  /** precinct number for each resolution level (width) */
  int pw[33];
  /** precinct number for each resolution level (height) */
  int ph[33];
  /** precinct size (in power of 2), in X for each resolution level */
  int pdx[33];
  /** precinct size (in power of 2), in Y for each resolution level */
  int pdy[33];
  /** information concerning packets inside tile */
  opj_packet_info_t *packet;
  /** add fixed_quality */
  int numpix;
  /** add fixed_quality */
  double distotile;
  /** number of tile parts */
  int num_tps;
  /** information concerning tile parts */
  opj_tp_info_t *tp;
} opj_tile_info_t;

/* UniPG>> */
/**
Marker structure
*/
typedef struct opj_marker_info_t {
  /** marker type */
  unsigned short int type;
  /** position in codestream */
  int pos;
  /** length, marker val included */
  int len;
} opj_marker_info_t;
/* <<UniPG */

/**
Index structure of the codestream
*/
typedef struct opj_codestream_info {
  /** maximum distortion reduction on the whole image (add for Marcela) */
  double D_max;
  /** packet number */
  int packno;
  /** writing the packet in the index with t2_encode_packets */
  int index_write;
  /** image width */
  int image_w;
  /** image height */
  int image_h;
  /** progression order */
  OPJ_PROG_ORDER prog;
  /** tile size in x */
  int tile_x;
  /** tile size in y */
  int tile_y;
  /** */
  int tile_Ox;
  /** */
  int tile_Oy;
  /** number of tiles in X */
  int tw;
  /** number of tiles in Y */
  int th;
  /** component numbers */
  int numcomps;
  /** number of layer */
  int numlayers;
  /** number of decomposition for each component */
  int *numdecompos;
/* UniPG>> */
  /** number of markers */
  int marknum;
  /** list of markers */
  opj_marker_info_t *marker;
  /** actual size of markers array */
  int maxmarknum;
/* <<UniPG */
  /** main header position */
  int main_head_start;
  /** main header position */
  int main_head_end;
  /** codestream's size */
  int codestream_size;
  /** information regarding tiles inside image */
  opj_tile_info_t *tile;
} opj_codestream_info_t;

#ifdef __cplusplus
extern "C" {
#endif


/*
==========================================================
   openjpeg version
==========================================================
*/

OPJ_API const OPJ_CHAR * OPJ_CALLCONV opj_version(void);

/*
==========================================================
   image functions definitions
==========================================================
*/

/**
Create an image
@param numcmpts number of components
@param cmptparms components parameters
@param clrspc image color space
@return returns a new image structure if successful, returns NULL otherwise
*/
OPJ_API opj_image_t* OPJ_CALLCONV opj_image_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);

/**
 * Creates an image without allocating memory for the image (used in the new version of the library).
 *
 * @param  p_num_cmpts      the number of components
 * @param  p_cmpt_parms    the components parameters
 * @param  p_clr_spc      the image color space
 *
 * @return  a new image structure if successful, NULL otherwise.
*/
OPJ_API opj_image_t* OPJ_CALLCONV opj_image_tile_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);

/**
Deallocate any resources associated with an image
@param image image to be destroyed
*/
OPJ_API void OPJ_CALLCONV opj_image_destroy(opj_image_t *image);

/*
==========================================================
   stream functions definitions
==========================================================
*/

/**
 * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream.
 *
 * @param  l_is_reader    if set to true then the stream will be an input stream, an output stream else.
 *
 * @return  a stream object.
*/
OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create(bool p_is_input);
OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_UINT32 p_size,bool p_is_input);

/**
 * Destroys a stream created by opj_create_stream. This function does NOT close the abstract stream. If needed the user must
 * close its own implementation of the stream.
 *
 * @param  p_stream  the stream to destroy.
 */
OPJ_API void OPJ_CALLCONV opj_stream_destroy(opj_stream_t* p_stream);

/**
 * Sets the given function to be used as a read function.
 * @param    p_stream  the stream to modify
 * @param    p_function  the function to use a read function.
*/
OPJ_API void OPJ_CALLCONV opj_stream_set_read_function(opj_stream_t* p_stream, opj_stream_read_fn p_function);

/**
 * Sets the given function to be used as a write function.
 * @param    p_stream  the stream to modify
 * @param    p_function  the function to use a write function.
*/
OPJ_API void OPJ_CALLCONV opj_stream_set_write_function(opj_stream_t* p_stream, opj_stream_write_fn p_function);

/**
 * Sets the given function to be used as a skip function.
 * @param    p_stream  the stream to modify
 * @param    p_function  the function to use a skip function.
*/
OPJ_API void OPJ_CALLCONV opj_stream_set_skip_function(opj_stream_t* p_stream, opj_stream_skip_fn p_function);

/**
 * Sets the given function to be used as a seek function, the stream is then seekable.
 * @param    p_stream  the stream to modify
 * @param    p_function  the function to use a skip function.
*/
OPJ_API void OPJ_CALLCONV opj_stream_set_seek_function(opj_stream_t* p_stream, opj_stream_seek_fn p_function);


/**
 * Sets the given data to be used as a user data for the stream.
 * @param    p_stream  the stream to modify
 * @param    p_data    the data to set.
*/
OPJ_API void OPJ_CALLCONV opj_stream_set_user_data (opj_stream_t* p_stream, void * p_data);

/**
 * Helper function.
 * Sets the stream to be a file stream. The FILE must have been open previously.
 * @param    p_stream  the stream to modify
 * @param    p_file    handler to an already open file.
*/
OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream (FILE * p_file,bool p_is_read_stream);
OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream (FILE * p_file,OPJ_UINT32 p_buffer_size, bool p_is_read_stream);



/*
==========================================================
   event manager functions definitions
==========================================================
*/
OPJ_API bool OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec, opj_msg_callback p_callback,void * p_user_data);
OPJ_API bool OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec, opj_msg_callback p_callback,void * p_user_data);
OPJ_API bool OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec, opj_msg_callback p_callback,void * p_user_data);



/*
==========================================================
   codec functions definitions
==========================================================
*/
/**
Creates a J2K/JPT/JP2 decompression structure
@param format Decoder to select
@return Returns a handle to a decompressor if successful, returns NULL otherwise
*/
OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_decompress(OPJ_CODEC_FORMAT format);

/**
Set decoding parameters to default values
@param parameters Decompression parameters
*/
OPJ_API void OPJ_CALLCONV opj_set_default_decoder_parameters(opj_dparameters_t *parameters);

#ifdef USE_OPJ_DEPRECATED
/**
Setup the decoder decoding parameters using user parameters.
Decoding parameters are returned in j2k->cp.
@param dinfo decompressor handle
@param parameters decompression parameters
*/
OPJ_API bool OPJ_CALLCONV opj_setup_decoder(opj_codec_t *dinfo, opj_dparameters_t *parameters);
#endif

/**
Decode an image from a JPEG-2000 codestream
@param dinfo decompressor handle
@param cio Input buffer stream
@return Returns a decoded image if successful, returns NULL otherwise
*/
OPJ_API opj_image_t* OPJ_CALLCONV opj_decode(opj_codec_t *p_decompressor, opj_stream_t * cio);

/**
 * Writes a tile with the given data.
 *
 * @param  p_compressor    the jpeg2000 codec.
 * @param  p_tile_index    the index of the tile to write. At the moment, the tiles must be written from 0 to n-1 in sequence.
 * @param  p_data        pointer to the data to write. Data is arranged in sequence, data_comp0, then data_comp1, then ... NO INTERLEAVING should be set.
 * @param  p_data_size      this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes,
 *                depending on the precision of the given component.
 * @param  p_stream      the stream to write data to.
 *
 * @return  true if the data could be written.
 */
OPJ_API bool OPJ_CALLCONV opj_write_tile (
           opj_codec_t *p_codec,
           OPJ_UINT32 p_tile_index,
           OPJ_BYTE * p_data,
           OPJ_UINT32 p_data_size,
           opj_stream_t *p_stream
          );

/**
 * Reads a tile header. This function is compulsory and allows one to know the size of the tile thta will be decoded.
 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile.
 *
 * @param  p_codec      the jpeg2000 codec.
 * @param  p_tile_index  pointer to a value that will hold the index of the tile being decoded, in case of success.
 * @param  p_data_size    pointer to a value that will hold the maximum size of the decoded data, in case of success. In case
 *              of truncated codestreams, the actual number of bytes decoded may be lower. The computation of the size is the same
 *              as depicted in opj_write_tile.
 * @param  p_tile_x0    pointer to a value that will hold the x0 pos of the tile (in the image).
 * @param  p_tile_y0    pointer to a value that will hold the y0 pos of the tile (in the image).
 * @param  p_tile_x1    pointer to a value that will hold the x1 pos of the tile (in the image).
 * @param  p_tile_y1    pointer to a value that will hold the y1 pos of the tile (in the image).
 * @param  p_nb_comps    pointer to a value that will hold the number of components in the tile.
 * @param  p_should_go_on  pointer to a boolean that will hold the fact that the decoding should go on. In case the
 *              codestream is over at the time of the call, the value will be set to false. The user should then stop
 *              the decoding.
 * @param  p_stream    the stream to decode.
 * @return  true      if the tile header could be decoded. In case the decoding should end, the returned value is still true.
 *              returning false may be the result of a shortage of memory or an internal error.
 */
OPJ_API bool OPJ_CALLCONV opj_read_tile_header(
          opj_codec_t *p_codec,
          OPJ_UINT32 * p_tile_index,
          OPJ_UINT32 * p_data_size,
          OPJ_INT32 * p_tile_x0,
          OPJ_INT32 * p_tile_y0,
          OPJ_INT32 * p_tile_x1,
          OPJ_INT32 * p_tile_y1,
          OPJ_UINT32 * p_nb_comps,
          bool * p_should_go_on,
          opj_stream_t * p_stream);


/**
 * Reads a tile data. This function is compulsory and allows one to decode tile data. opj_read_tile_header should be called before.
 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile.
 *
 * @param  p_codec      the jpeg2000 codec.
 * @param  p_tile_index  the index of the tile being decoded, this should be the value set by opj_read_tile_header.
 * @param  p_data      pointer to a memory block that will hold the decoded data.
 * @param  p_data_size    size of p_data. p_data_size should be bigger or equal to the value set by opj_read_tile_header.
 * @param  p_stream    the stream to decode.
 *
 * @return  true      if the data could be decoded.
 */
OPJ_API bool OPJ_CALLCONV opj_decode_tile_data(
          opj_codec_t *p_codec,
          OPJ_UINT32 p_tile_index,
          OPJ_BYTE * p_data,
          OPJ_UINT32 p_data_size,
          opj_stream_t *p_stream
          );

/**
 * Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading.
 *
 * @param  p_codec      the jpeg2000 codec.
 * @param  p_start_x    the left position of the rectangle to decode (in image coordinates).
 * @param  p_end_x      the right position of the rectangle to decode (in image coordinates).
 * @param  p_start_y    the up position of the rectangle to decode (in image coordinates).
 * @param  p_end_y      the bottom position of the rectangle to decode (in image coordinates).
 *
 * @return  true      if the area could be set.
 */
OPJ_API bool OPJ_CALLCONV opj_set_decode_area(
          opj_codec_t *p_codec,
          OPJ_INT32 p_start_x,
          OPJ_INT32 p_start_y,
          OPJ_INT32 p_end_x,
          OPJ_INT32 p_end_y
          );


/**
Decode an image from a JPEG-2000 codestream and extract the codestream information
@param dinfo decompressor handle
@param cio Input buffer stream
@param cstr_info Codestream information structure if needed afterwards, NULL otherwise
@return Returns a decoded image if successful, returns NULL otherwise
*/
//OPJ_API opj_image_t* OPJ_CALLCONV opj_decode_with_info(opj_dinfo_t *dinfo, opj_stream_t cio, opj_codestream_info_t *cstr_info);
/**
Creates a J2K/JP2 compression structure
@param format Coder to select
@return Returns a handle to a compressor if successful, returns NULL otherwise
*/
OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_compress(OPJ_CODEC_FORMAT format);

/**
Destroy a decompressor handle
@param dinfo decompressor handle to destroy
*/
OPJ_API void OPJ_CALLCONV opj_destroy_codec(opj_codec_t * p_codec);

/**
Set encoding parameters to default values, that means :
<ul>
<li>Lossless
<li>1 tile
<li>Size of precinct : 2^15 x 2^15 (means 1 precinct)
<li>Size of code-block : 64 x 64
<li>Number of resolutions: 6
<li>No SOP marker in the codestream
<li>No EPH marker in the codestream
<li>No sub-sampling in x or y direction
<li>No mode switch activated
<li>Progression order: LRCP
<li>No index file
<li>No ROI upshifted
<li>No offset of the origin of the image
<li>No offset of the origin of the tiles
<li>Reversible DWT 5-3
</ul>
@param parameters Compression parameters
*/
OPJ_API void OPJ_CALLCONV opj_set_default_encoder_parameters(opj_cparameters_t *parameters);

/**
 * Sets the MCT matrix to use.
 *
 * @param  parameters    the parameters to change.
 * @param  pEncodingMatrix  the encoding matrix.
 * @param  p_dc_shift    the dc shift coefficients to use.
 * @param  pNbComp      the number of components of the image.
 *
 * @return  true if the parameters could be set.
 */
OPJ_API bool OPJ_CALLCONV opj_set_MCT(opj_cparameters_t *parameters,OPJ_FLOAT32 * pEncodingMatrix,OPJ_INT32 * p_dc_shift,OPJ_UINT32 pNbComp);

/**
 * Restricts the decoding to the given image area.
 *
 * @param  parameters    the parameters to update.
 * @param  p_start_x    the starting x position of the area to decode.
 * @param  p_start_y    the starting y position of the area to decode.
 * @param  p_end_x      the x end position of the area to decode.
 * @param  p_end_x      the y end position of the area to decode.
 */
OPJ_API bool OPJ_CALLCONV opj_restrict_decoding (opj_dparameters_t *parameters,OPJ_INT32 p_start_x,OPJ_INT32 p_start_y,OPJ_INT32 p_end_x,OPJ_INT32 p_end_y);

#ifdef USE_OPJ_DEPRECATED
/**
Setup the encoder parameters using the current image and using user parameters.
@param cinfo Compressor handle
@param parameters Compression parameters
@param image Input filled image
*/
OPJ_API bool OPJ_CALLCONV opj_setup_encoder(opj_codec_t *cinfo, opj_cparameters_t *parameters, opj_image_t *image);
#endif

/**
 * Decodes an image header.
 *
 * @param  p_codec      codec to use to decode the image.
 * @param  p_image      pointer to a previously created image.
 * @param  p_tile_x0    pointer to a value that will hold the reference point x0 of the tiling grid.
 * @param  p_tile_y0    pointer to a value that will hold the reference point y0 of the tiling grid.
 * @param  p_tile_width  pointer to a value that will hold the size in x of a tile in the grid.
 * @param  p_tile_height  pointer to a value that will hold the size in y of a tile in the grid.
 * @param  p_nb_tiles_x  pointer to a value that will hold the number of tiles in the x direction.
 * @param  p_nb_tiles_y  pointer to a value that will hold the number of tiles in the y direction.
 */
OPJ_API bool OPJ_CALLCONV opj_read_header (
                    opj_codec_t *p_codec,
                    opj_image_t ** p_image,
                    OPJ_INT32 * p_tile_x0,
                    OPJ_INT32 * p_tile_y0,
                    OPJ_UINT32 * p_tile_width,
                    OPJ_UINT32 * p_tile_height,
                    OPJ_UINT32 * p_nb_tiles_x,
                    OPJ_UINT32 * p_nb_tiles_y,
                    opj_stream_t *p_cio);


OPJ_API bool OPJ_CALLCONV opj_end_decompress (opj_codec_t *p_codec,opj_stream_t *p_cio);
/**
Encode an image into a JPEG-2000 codestream
@param cinfo compressor handle
@param cio Output buffer stream
@param image Image to encode
@param index Depreacted -> Set to NULL. To extract index, used opj_encode_wci()
@return Returns true if successful, returns false otherwise
*/
OPJ_API bool OPJ_CALLCONV opj_encode(opj_codec_t *cinfo, opj_stream_t * cio);

OPJ_API bool OPJ_CALLCONV opj_start_compress (opj_codec_t *p_codec,opj_image_t * p_image,opj_stream_t *p_cio);

OPJ_API bool OPJ_CALLCONV opj_end_compress (opj_codec_t *p_codec,opj_stream_t *p_cio);
/**
Encode an image into a JPEG-2000 codestream and extract the codestream information
@param cinfo compressor handle
@param cio Output buffer stream
@param image Image to encode
@param cstr_info Codestream information structure if needed afterwards, NULL otherwise
@return Returns true if successful, returns false otherwise
*/
//OPJ_API bool OPJ_CALLCONV opj_encode_with_info(opj_cinfo_t *cinfo, opj_stream_t cio, opj_image_t *image, opj_codestream_info_t *cstr_info);
/**
Destroy Codestream information after compression or decompression
@param cstr_info Codestream information structure
*/
OPJ_API void OPJ_CALLCONV opj_destroy_cstr_info(opj_codestream_info_t *cstr_info);

//==============================================================================
//==============================================================================
/** profiling part */
#ifdef _PROFILE
void _ProfInit(void);
void _ProfPrint(void);
#define PROFINIT() _ProfInit();
#define PROFSAVE(file) _ProfSave(file);
#define PROFPRINT() _ProfPrint();
#else
#define PROFINIT()
#define PROFSAVE(file)
#define PROFPRINT()
#endif // !_PROFILE

#ifdef __cplusplus
}
#endif

#endif /* OPENJPEG_H */